Skip to content
ARYAN TRANSPORTFreight & Logistics · Est. 2007
Two logistics managers reviewing shipment results on a tablet in front of a dashboard wall

Case Studies

How we solve freight problems.

Real freight rarely goes exactly to plan. These examples show how our desk approaches the hard moments: a stopped line, a peak season, a load nobody else wanted to plan.

Example Scenario · PlaceholderManufacturing · Expedited / Team Truckload

Keeping a production line running after a supplier missed a shipment

The challenge

A component supplier's truck broke down overnight, leaving a plant several hundred miles away with less than a shift of parts on hand. The plant's planners called our dispatch desk late in the evening.

Our approach

  1. 1Dispatch quoted three options within minutes: a cargo van for a partial quantity, a team truckload for the full order and an air option for the most critical parts.
  2. 2The plant chose a split: a van for enough parts to keep the line running and a team truck for the balance.
  3. 3Both trucks were tracked with hourly updates, and the plant's receiving team was told the arrival times in advance so they could stage the parts at the line.

The goal

In a scenario like this, the line keeps running, the premium freight is limited to what was truly urgent, and the supplier's lane is reviewed afterwards to add a backup carrier so the same failure is less likely to repeat.

Example Scenario · PlaceholderRetail & Consumer Goods · Dry Van / Drop Trailer

Preparing a consumer goods shipper for peak season

The challenge

A consumer goods company expected its outbound volume to roughly double for the holiday season, with most loads going to retail distribution centers that enforce strict appointment rules and chargebacks.

Our approach

  1. 1Two months ahead, we forecast weekly volume by lane with the shipper's planners and lined up carriers already approved on those retailers.
  2. 2A drop-trailer pool at the shipper's dock let the warehouse load to its own schedule instead of holding live trucks.
  3. 3Every load was tracked against its DC appointment, with early warnings when one was at risk so it could be moved in time.

The goal

The aim in a program like this is to protect the shipper's retailer scorecard during the busiest weeks of the year and avoid paying spot market prices for capacity that could have been planned.

Example Scenario · PlaceholderEnergy · Heavy Haul / Multi-Axle

Moving a substation transformer to a rural utility site

The challenge

A utility contractor needed a heavy transformer moved from a rail siding to a new substation reached by narrow county roads, with a crane booked for a single day.

Our approach

  1. 1Our specialized desk selected a multi-axle trailer to meet bridge and axle limits and ordered permits for each state on the route.
  2. 2A route survey checked turns, clearances and soft shoulders on the final miles, and escorts were booked where required.
  3. 3Arrival was timed to the crane booking, with the site superintendent updated at each stage of the move.

The goal

For a move like this, success means the unit arrives on the day the crane is there, with no damage and no surprise permit delays, and the project schedule holds.

Example Scenario · PlaceholderFood & Cold Chain · Reefer

Reducing temperature rejections on a fresh produce program

The challenge

A produce shipper was seeing loads rejected at grocery distribution centers for temperature, and each rejection meant lost product, a salvage sale and a strained relationship with the buyer.

Our approach

  1. 1We reviewed the shipper's written instructions and found set points and run modes were not reaching drivers consistently, so we put them on every rate confirmation and required written carrier confirmation.
  2. 2Drivers were asked to pre-cool, record pulp temperatures where the shipper allowed and write the set point on the bill of lading at pickup.
  3. 3Reefer downloads were requested on any load that arrived with a question, so the cause could be found rather than argued about.

The goal

In a program like this, the goal is fewer rejected loads, faster answers when one does happen and a carrier group that understands the shipper's product and receivers.

Example Scenario · PlaceholderAutomotive · Cross-Border Truckload

Making a Mexico-to-Midwest parts lane predictable

The challenge

An automotive supplier shipping parts from northern Mexico to a Midwest assembly plant was seeing unpredictable border delays that put plant delivery windows at risk.

Our approach

  1. 1We confirmed paperwork with the customs broker before each load reached the border and set a cutoff time for documents.
  2. 2Transfer points and handoffs between the Mexican and U.S. carriers were fixed and timed, with a named contact on each side.
  3. 3Loads were tracked against the plant window, not just the delivery date, with a recovery truck identified for at-risk loads.

The goal

The aim on a lane like this is a border crossing that is planned rather than hoped for, and a plant that hears about any delay early enough to adjust.

About these stories

Customer-approved, or clearly marked.

How we will share real results

Our customers trust us with freight that matters to their business, and many of them prefer not to have their names, lanes or volumes published. We respect that. Every case study we publish will be approved by the customer first, and any numbers in it will come from their records and ours, not from estimates.

Until those approved stories are ready, the examples on this page describe the kinds of problems we solve every week and the way we approach them. They are labelled as examples so nobody mistakes them for a specific customer's results. As approved stories arrive, they will replace the examples one by one, with the customer's name only where they have agreed to it.

What every engagement has in common

Whatever the industry or mode, the pattern is the same. We start by understanding the freight, the facilities and what failure would cost. We choose carriers on safety and fit before price. We write every requirement down, track the load against the times that matter to the customer and tell them early when something is at risk. Afterwards, we look at what could be done better next time.

We also measure ourselves after the fact. On recurring programs we review on-time performance, claims, detention and any service failures with the customer, agree what caused them and decide what to change. Those reviews are where most improvements come from, and they are the material real case studies will be built on.

If you would like to talk to a current customer in a similar industry before working with us, ask. Where a customer has agreed to act as a reference, we will put you in touch after checking they are happy to speak with you.

Customer logos will appear on this page the same way. We add a company's logo only after someone at that company has agreed in writing, and we take it down whenever they ask. If you see a name here, it is there because that customer chose to be listed.

Have freight that needs to move?

Send the lane, the equipment and the date. Our team prices standard truckload lanes within the hour on business days, and the dispatch desk answers around the clock.