Skip to content
ARYAN TRANSPORTFreight & Logistics · Est. 2007
Map of North America with freight lanes linking cities across the United States, Canada and Mexico

Instant Lane Estimate

What should this lane cost?

Enter a pickup, a delivery and the equipment. You will see an estimated price range, approximate miles and transit time in a second, then you can send it to our desk for a firm quote.

Moving vehicles? Get three instant auto and fleet prices →

Rate guide

Planning rates by equipment.

All-in linehaul and fuel per loaded mile, before accessorials. Short runs are subject to the minimum charge.

EquipmentPer MileMinimumWatch For
Dry Van 53'$2.05 – $2.75$650 – $900Extra stops, detention and lumper fees.
Reefer 53'$2.40 – $3.15$750 – $1050Extra stops, detention and lumper fees.
Flatbed 48'/53'$2.55 – $3.35$850 – $1150Tarps, oversize width and extra securement are priced on top.
Step Deck$2.80 – $3.65$950 – $1300Loads over 8'6" wide or 10' tall need permits, priced separately.
RGN / Lowboy Heavy Haul$4.25 – $6.75$2200 – $3400Permits, escorts and route surveys are quoted per state after we see dimensions.
Expedited Box Truck / Sprinter$1.85 – $2.70$425 – $650Team drivers for non-stop runs add roughly 25 to 40 percent.
LTL / Volume Partial$0.95 – $1.75$325 – $550Shown for roughly 6 to 12 pallets. Class, density and liftgate needs move the price.
Container Drayage (Port or Rail)$3.10 – $4.10$475 – $725Chassis, pre-pull, storage and port fees are extra. Most drayage runs under 250 miles.

About the estimate

How lane pricing works.

What the range includes, what moves it and how to turn it into a firm price.

How the estimate is worked out

The estimator places both ends of the lane, works out the approximate road miles and multiplies them by a low and a high all-in rate for the equipment you chose. It then adds a small allowance for the pickup and the delivery, and applies a minimum charge so that short runs are not shown at a price no truck would accept. The result is a range rather than a single number, because two loads on the same lane in the same week can price differently for perfectly ordinary reasons.

The rates behind the range are planning figures that our desk reviews and updates. They include linehaul and fuel for one pickup and one delivery on standard equipment. They do not include extra stops, detention, lumper fees, tarps, permits, escorts, team drivers or port and rail charges. Where one of those is common for an equipment type, the estimator says so under the price.

If a city is not in our lookup, the estimator places it by state, which makes the mileage rougher. A ZIP code is placed the same way. Either way the range is still useful for budgeting, and the freight desk prices the exact addresses when you request a firm quote.

What moves a truckload rate

Truckload pricing is a market. On any given day, the rate for a lane reflects how many trucks are near the pickup, how many loads are competing for them, and how easy it will be for the driver to find the next load after delivery. These are the factors that most often push a price toward the top or the bottom of the range:

  • Lane balance. Freight heading into a busy market where trucks reload quickly prices lower than freight heading into an area where trucks sit empty or deadhead out.
  • Season and week. Produce season, holiday retail peaks, quarter-end pushes and severe weather all tighten capacity. Rates also tend to firm up at the end of a month.
  • Lead time. A load tendered several days ahead gives us room to find the right carrier at the right price. A load that must pick up in two hours does not.
  • Equipment. Reefers, flatbeds and specialized trailers have smaller fleets than dry vans, and their rates move more sharply when demand rises.
  • Facility terms. Long dwell times, tight appointment windows, driver unload and weekend hours all cost the carrier time, and the rate reflects it.
  • Weight and dimensions. Heavy loads, loads near legal limits and anything over width or height add cost, permits and sometimes route changes.

Using the range for budgeting

For a one-off shipment, the middle of the range is a reasonable budget figure in a normal week. If the pickup is within a day or two, falls near a holiday or month end, or the freight is going somewhere trucks rarely reload, plan toward the top of the range. If you have flexible dates and easy facility hours, the lower half is more realistic.

For a recurring lane, run the estimate for each equipment type you could use. A load that fits a dry van but has been moving on a flatbed out of habit, or a reefer load that could ship protect-from-freeze in a van for part of the year, can be a real saving. Our desk can talk through those options with you when you request a quote.

Accessorials are where budgets most often go wrong. If your receiver regularly holds trucks for hours, charges lumper fees or needs a liftgate, include an allowance for them. We quote expected accessorials up front so they are agreed before the truck is dispatched.

Spot quotes and contract lanes

A spot quote prices one load against the market that day. It is the right choice for occasional freight and for loads that do not repeat on a schedule. A contract or dedicated lane rate is agreed for a period of time for freight that moves regularly, and it trades some of the market's ups and downs for consistency on both sides.

If you ship the same lane every week, ask the desk about a lane rate. We look at your volume, your facility hours and the lane's seasonality, and then propose a rate and a capacity plan we can actually keep. The estimator is a good way to sanity-check what a lane should cost before that conversation.

From estimate to a firm quote

When the range looks right, use the button under the estimate. It opens the freight request form with your lane and equipment already filled in. Add the commodity, weight, pickup date and your contact details, and the request is logged with an AT reference number straight away.

Standard truckload lanes are normally priced within the hour on business days. Specialized, heavy haul and cross-border freight take longer because permits, routes and border paperwork have to be checked first. Every firm quote lists what is included and what is not, so there are no surprises on the invoice.

Estimator FAQs

Common questions

Is the estimate a quote?

No. It is a planning range based on typical all-in rates for the equipment and distance. A firm price comes from our freight desk after we review the exact addresses, date and freight details.

Why is the range so wide on some lanes?

Short lanes, heavy haul and specialized equipment vary more from load to load. Minimum charges, permits and facility terms have a larger effect on the total when the mileage is low.

Does the estimate include fuel?

Yes. The range is all-in for linehaul and fuel with one pickup and one delivery. Accessorials such as extra stops, detention, tarps or permits are added when they apply.

Can I get an estimate for auto or fleet moves?

Use the Auto & Fleet tab on the quote page. It shows three instant prices for vehicle transport and gives you an AV quote number.

Have freight that needs to move?

Send the lane, the equipment and the date. Our team prices standard truckload lanes within the hour on business days, and the dispatch desk answers around the clock.