
Safety & Compliance
Every carrier checked. Every load documented.
Safety is the first filter on every shipment we arrange. These are the standards carriers must meet and the practices we follow on the road.
Carrier vetting
What a carrier must pass before hauling for us
Operating authority
Every carrier must hold active FMCSA operating authority and a valid USDOT number before it is offered a load.
Insurance on file
Auto liability and cargo coverage are verified with the insurer, and policies are monitored for cancellation.
Safety performance
We review safety ratings, inspection results, out-of-service rates and crash history, and decline carriers that fall short.
Identity and fraud checks
Contact details, equipment and payment information are verified to prevent double brokering and identity theft.
Hazmat qualification
Hazardous loads go only to carriers with the registrations, permits, insurance limits and endorsed drivers required.
Ongoing monitoring
Carrier status is re-checked continuously, not just at onboarding. Changes in authority or insurance pause new tenders.
On the road
Operating practices by freight type
Cargo securement
Open-deck loads follow 49 CFR Part 393 securement rules. Commodity-specific requirements, edge protection and tarp needs are written on the rate confirmation.
Food safety
Refrigerated food loads carry written temperature and sanitary instructions under the FSMA Sanitary Transportation rule, with pre-cool and record requirements.
Hazardous materials
Hazmat loads require correct shipping papers, placards where needed, endorsed drivers and carriers with the registrations and insurance for the class.
Oversize permits
Oversize and overweight loads move only with valid state permits, required escorts and approved routes.
Hours of service
We plan transit times that respect federal hours-of-service limits, and use team drivers rather than unrealistic schedules when time is short.
Claims handling
When damage or loss occurs, we document it, notify the carrier and insurer promptly and work the claim through to resolution with you.
Standards in detail
How we qualify and monitor carriers.
The checks behind every tender, from authority and insurance to fraud prevention and hours of service.
Carrier qualification in detail
Before a carrier hauls its first load for us, we check that its operating authority is active and that the authority type matches the freight. We confirm that auto liability and cargo insurance are in force at or above our minimum limits, that the certificate lists the correct insured name and that ARYAN TRANSPORT is named as a certificate holder. We review the carrier's safety rating, inspection history, out-of-service rates and crash record.
Carriers with an unsatisfactory rating are not approved. Carriers with elevated out-of-service rates or recent serious violations receive additional review, and some are approved only for specific freight or not at all. We also check for signs of identity fraud, such as recently changed contact information, mismatched addresses or authority that was dormant for a long period and then reactivated.
Ongoing monitoring
Approval is not permanent. We monitor authority and insurance status continuously, so a cancellation or a revoked authority is flagged before the next load is offered. Safety data is reviewed on a regular schedule. If a carrier's performance declines, our carrier relations team contacts them, and continued problems lead to suspension.
- Daily checks for authority and insurance changes
- Periodic review of inspection and crash data
- Service scorecards for on-time pickup and delivery
- Claims history by carrier
- Feedback from shippers and receivers
Cargo securement and load integrity
Open deck freight must be secured according to federal securement rules for its commodity. Carriers supply the straps, chains, binders, edge protectors and tarps the load needs, and drivers are expected to inspect securement at the start of the trip and at the intervals required by regulation. For enclosed freight, we ask shippers to load and brace freight so it cannot shift and to apply seals when the receiver requires them. Seal numbers are recorded on the bill of lading and checked at delivery.
Hazardous materials
Hazmat loads are booked only with carriers registered and insured for the hazard class involved, with drivers holding the correct endorsement. The shipper must provide accurate shipping papers, emergency response information and placards. We confirm placard requirements, segregation rules and any route restrictions before dispatch. Loads requiring a hazmat safety permit are booked only with carriers holding that permit.
Fraud prevention and freight security
Cargo theft and carrier impersonation have grown across the industry. We verify carrier contact information independently rather than relying on details supplied in an email. Changes to payment information require verification by phone with a known contact. Drivers are identified at pickup, and high-value loads can be assigned additional requirements such as team drivers, no-stop windows or tracking at set intervals.
If you ever receive a call or email claiming to be from ARYAN TRANSPORT that seems unusual, such as a request to change payment details or release freight to a different truck, call our dispatch line directly before acting.
Hours of service and realistic planning
We do not ask drivers to break hours-of-service rules to meet a schedule. When a delivery time cannot be met legally by a solo driver, we offer team service or tell the shipper the realistic delivery time. Planning transit times honestly protects drivers, protects the public and protects the shipper from the liability that comes with pressuring a carrier into an unsafe run.
Temperature-controlled freight standards
For refrigerated loads, carriers must pre-cool the trailer to the set point before loading, run the unit in the mode the shipper specifies, and record the temperature at pickup and delivery. The set point and mode are written on the bill of lading and the rate confirmation. If a reefer unit alarms in transit, the driver contacts dispatch immediately, and we decide with the shipper whether to continue, repair or transfer the load.
Oversize and overweight compliance
Oversize and overweight loads move only with valid permits for every state on the route. Permits specify the route, travel times, escort requirements and sometimes specific bridges or utilities to avoid. Carriers must follow the permitted route exactly. We confirm escort vehicle certification where states require it and check that signs, flags and lights meet each state's rules before the load departs.
Reporting a safety concern
Shippers, receivers, drivers and members of the public can report a safety concern about any load we arranged by calling our dispatch line. Reports are logged, reviewed by our compliance team and followed up with the carrier. Serious concerns can lead to immediate suspension while the matter is investigated.
Documentation we keep
For every load, we keep the signed rate confirmation, the carrier's authority and insurance status at the time of tender, the bill of lading, proof of delivery and any exception notes or photos. For specialized freight, we also keep permits, temperature records and hazmat shipping papers where applicable. These records support claims, audits and any review a shipper or regulator may request.
Shippers with their own carrier requirements, such as higher insurance limits, specific safety scores or security programs, can add them to their account. Those requirements are then applied automatically every time a carrier is selected for their freight.
Questions about our carrier standards?
Our compliance team will walk you through how we qualify and monitor carriers for your freight.