
Shipping Guide · 8 min read
How to prepare freight for pickup
Most problems on the road start at the dock. A few minutes of preparation before the truck arrives prevents damage, delays, extra charges and disputes at delivery.
Start with accurate shipment details
Every quote, every carrier choice and every rate confirmation is built on the details you provide when you book. If they are wrong, the wrong truck can show up, the price can change after the fact and the load can be refused at delivery. Before you request a quote, collect these facts:
- Exact pickup and delivery addresses, including ZIP codes, and the name of each facility.
- Dock hours, appointment requirements and whether either end needs a liftgate or has no dock.
- What the freight is, how it is packaged and whether any of it is hazardous.
- Total weight, number of pallets or pieces and the dimensions of the largest piece.
- Any temperature requirement, with the set point and whether the reefer should run continuously.
- Reference numbers the receiver will ask for, such as a purchase order or delivery number.
Weight matters more than most shippers expect. A truckload that is heavier than quoted may need a different truck or route, and an LTL shipment that is reweighed at the terminal will be re-billed. If you are not sure, weigh it.
Package and palletize for the whole trip
Freight is handled more than you think. LTL shipments may be loaded and unloaded several times at terminals, and even truckload freight is moved by forklifts at both ends and shaken for hundreds of miles in between. Package for the roughest part of the trip, not the smoothest.
Use sound pallets that fit the freight, with no overhang. Stack boxes in columns with heavier items at the bottom, and keep the top flat so nothing can be stacked on fragile goods unless you allow it. Stretch-wrap the load to the pallet, not just to itself, and use corner boards or banding for heavy or unstable stacks. Label each pallet clearly with the consignee, the delivery address and the number of pieces, for example 1 of 4.
Open-deck freight such as steel, lumber and machinery needs a different approach. Make sure the freight can be secured: lifting points identified, loose parts removed or tied down, and anything that must stay dry flagged so the carrier brings tarps.
Get the paperwork ready
The bill of lading is the most important document on the load. It should name the shipper and consignee, list the number of pieces and their weight, describe the commodity accurately and include any special instructions such as temperature, seal number or delivery appointment. If the freight is hazardous, the shipping papers must meet the hazmat rules, and the emergency contact number must be one that is answered.
Have the BOL printed and ready when the driver arrives. Count the freight with the driver, note any exceptions on the BOL before it is signed, and record the trailer and seal numbers. For refrigerated loads, write the set point on the BOL and check that it matches the reefer unit.
Prepare the dock and the people
Make sure the people on the dock know the truck is coming, what it is picking up and when. If the freight is not ready when the truck arrives, the carrier can start charging detention after the free time, usually two hours, and on a tight schedule the delay can cost a delivery appointment.
If your facility has rules for drivers, such as safety vests, check-in at a gate or no-idle zones, tell your broker when you book so the carrier is told before arrival. If the driver is expected to help load, count pieces or remove old freight, say so in advance. Surprises at the dock lead to disputes later.
Communicate changes early
Plans change. A production delay, an order change or a new receiving time is normal. What causes trouble is telling the carrier after the truck has already been dispatched. As soon as you know something has changed, call your broker. A pickup moved by a few hours with notice usually costs nothing. The same change made when the truck is at your gate can mean a truck-ordered-not-used fee or a missed delivery.
Finally, keep a copy of everything: the signed BOL, any exception notes, photos of the loaded trailer and the seal. If a question comes up at delivery, those records settle it quickly.
A pickup-day checklist
On the day of pickup, a short routine at the dock prevents most problems. Check that the freight matches the order and the bill of lading. Confirm the driver's name, carrier name and truck and trailer numbers against the information your broker sent you, which is also an important fraud check. Inspect the trailer before loading: it should be clean, dry, free of odors and holes, and for reefers, pre-cooled to the set point.
After loading, count the pieces with the driver, apply and record the seal, and have the driver sign the bill of lading. Note anything unusual, such as a pallet that was re-wrapped or a trailer that was not pre-cooled, on the BOL before it is signed. Take photos. Then send the signed BOL to your broker, which starts the shipment record and gives everyone the same reference.
Special cases: hazmat, high value and temperature
Some freight needs extra preparation. Hazardous materials need correct shipping papers, labels and placards where required, and the carrier must be told the class and UN number before dispatch. High-value freight should be loaded with a recorded seal, and you may want team or no-stop service so the trailer is never left unattended. Temperature-controlled freight should be at the right temperature before it is loaded: a reefer maintains temperature, it does not pull product down quickly. Tell your broker about any of these when you book, not on the day of pickup.
Questions
Quick answers
How do I know the driver is really from the assigned carrier?
Check the carrier name, truck and trailer numbers and the driver's name against what your broker sent. If anything does not match, do not release the freight until you have called the broker.
Who provides the bill of lading?
Usually the shipper. If you do not have a template, your broker can provide one. What matters is that it is accurate and signed at pickup.
What if my freight is not ready when the truck arrives?
Tell your broker as early as possible. After the free time, the carrier may charge detention, and a long delay can affect the delivery appointment.
Should I take photos at pickup?
Yes. Photos of the loaded freight, the trailer and the seal are simple insurance against disputes at delivery.
Have freight that needs to move?
Send the lane, the equipment and the date. Our team prices standard truckload lanes within the hour on business days, and the dispatch desk answers around the clock.